프리다이빙 일정

Cree was hesitant so as to add a wise bulb to its best-promoting LED lineup, however that modified this yr with the addition of the $15 Cree Linked LED. Sharing the construct and lighting specs of final yr's properly-reviewed Cree 4Flow LED , the brand new Linked LED provides in a Zigbee radio. Pair it with a control hub, and you will be able to show it on and off remotely, or schedule automated lighting modifications. At launch, Cree's smart bulb was considerably married to the Wink Hub , which made sense given that you'll purchase both off the shelf at Home Depot. Since then, nevertheless, we've seen official help roll out for added control gateways, EcoLight including SmartThings and the Philips Hue Bridge . You may add the bulbs to the brand new D-Link model of the Staples Connect Hub , too, though there is not official, Zonoff-certified help just but. The bulb works well throughout all the platforms we have examined it with, and it shares the strong lighting specs of the 4Flow LED that came before it.

Most interesting is the value. At $15 -- only a few dollars more than you may spend on non-linked competitors -- it ties with the GE Hyperlink LED as probably the most cheap connected bulb available on the market. For basic automated lighting, it's the perfect option we've tested but, and our current Editors' Alternative winner. Cree adapted its good bulb design from last 12 months's 4Flow LED, packing a Zigbee radio into the existing construct. That implies that this isn't a bulb that goes out of its way to look fancy or newfangled -- instead, it copies the 4Flow's emphasis on mimicking the silhouette of basic incandescents. I appreciated that strategy with the 4Flow, and i prefer it with the brand new Connected LED too, though some may discover the plastic build to be a bit low-cost-looking, especially when the bulb is turned off. The new bulb additionally shares the 4Flow's convection cooling trick, which makes use of vents to circulate air via the physique of the bulb, eliminating the need for heat sinks.

That helps bring manufacturing prices down, and also means that the bulb is exceptionally gentle for an LED, weighing in at less than 2 ounces. The Cree Related LED shares the identical lighting specs as the 4Flow LED, too, and that's largely a great factor. Both claim a light output of 815 lumens, and both clocked in even greater than that in entrance of our spectrometer -- 835 lumens for the 4Flow, and a very impressive 872 for the Linked LED. When it comes to efficiency, the 4Flow places its light out using eleven watts, but the number rises to 11.5 watts for the Linked LED on account of the Zigbee radio's EcoLight energy draw. After we tested it out, the quantity was actually nearer to 11.1 watts, so Cree's executed a superb job of keeping this bulb comparatively efficient. Still, it is worth noting that both the Philips Hue Lux LED and the Belkin WeMo LED are even more environment friendly, each one drawing less than 10 watts.

Cree also did a very good job with color temperature here, landing extremely close to the acknowledged 2,700K. At 2,696K, the Cree Linked LED lands closer to the mark than any other good bulb we have examined, so if you're choosy about that good shade of warm, yellowy mild, you will like this LED. The one place where Cree's good bulb lags behind at the least among the competitors is the colour rendering score, which measures how accurately a given gentle supply illuminates completely different shades. The Cree Connected LED hits a quite strange score of 80 out of 100, and provided that both the WeMo LED and the equally inexpensive GE Hyperlink LED hit nearer to 90, I might have favored to see Cree do better. To entry the Cree LED's smart options, you will have to pair it with a control hub that can translate its Zigbee signal into Wi-Fi. Like the GE Hyperlink LED, the Cree Related LED came out the gate trumpeting Wink support at launch, however soon expanded its third party compatibility to include choices like SmartThings, Staples Join , and the Philips Hue Bridge .

Completely different platforms provide different options -- SmartThings and Philips bring IFTTT support into the picture, for example -- however on the whole, the automating experience is essentially the same. We examined the bulb on multiple platforms, and by no means ran into any difficulties pairing it or controlling it. Regardless of which platform you are using, you will be ready to turn the Cree Related LED on or off remotely, dim it, or automate it utilizing whatever controls your system affords. These likely include setting the lights to a timed schedule, or syncing them up with issues like movement sensors. The bulb paired simply with each of the above-talked about platforms. Wink and SmartThings each have devoted settings and pairing directions for the Cree LED proper within the app, which helps. Staples Connect doesn't offer gadget-specific support for Cree simply yet, but it was able to detect the bulb as a generic Zigbee system on the primary attempt. Syncing the Cree LED with a Philips Hue setup was pretty painless, too, although I needed to manually reset the bulb during the pairing process in order to help the bridge find it.